Can I Remove The Fans From My Gigabyte 770 To Clean Them
- #1
PC Spec:
SilentiumPC Deus M1 650W
Gigabyte GeForce GTX770 WindForce
Intel Core i5-3570K
MSI Z77A-GD55
- May 22, 2022
- 1,101
- 0
- ii,660
- 198
- #11
If you said the GPU shutoff without warning there's a good chance a voltage regulator blew. Hopefully this isn't the case.
I would recommend resetting your CMOS (take out motherboard battery and all power connections for ten minutes), remove 1 stick of RAM, and clean off the GPU and PCI slot with booze or cleaner of your option.
If you tin can get the GPU to boot, put your other RAM back in and go on with your mean solar day. Good luck.
Your motherboard also 2 PCI-E slots available. It's very possible that a slot can be damaged. Try the other i.
Ok, here's what i'five washed:
Cleaned PCI slots
Cleaned GPU
Removed CMOS battery like y'all said
Now information technology seems similar fans are running at normal speed, not at 100% like earlier, simply there is still "No Betoken" information on my screen so I cant practise anything on that card, cant hear any beeps or anything similar that.
Not sure if that matters but at present im using Intel's carte du jour and everything running fine on it.
It seems progress may have been made simply we're not there still.
Can you lot go into the BIOS and double check that your Video is set to the PCI-East? Do you lot have your monitor plugged into the GPU and Not your motherboard (I know it sounds ridiculous and I don't desire to belittle you, but it does happen).
If all else fails, delight try the bottom PCI-E slot.
I changed some options of integrated graphic card in BIOS and its WORKING! ITS Live ! ! ! !
Weird remember is that when all it happened I didnt touch on whatsoever options so how can I preclude similar situations in hereafter?
It's hard to say at this point but I think the solution was resetting the CMOS completely to refresh the systems BIOS, and then switching over to your GPU to seal the bargain.
My guess is a power surge, heat, or a K shock triggered your system to go unstable and decadent your CMOS. Lookout temps closely for the next while. Plug your computer direct into the wall (No power-bar)
Good luck and good to hear information technology's working.
- Sep 19, 2022
- 477
- 0
- 1,960
- 91
- #2
Can you please tell me what tiptop temps that you accomplish? It may not exist a oestrus problem - it can be anything, just most commonly it's caused by heat.
- #three
Tin can you please tell me what summit temps that you achieve? It may not be a heat problem - information technology tin can be annihilation, but almost normally it's caused by estrus.
Dont think its because of temperatures, when I plough my PC on, fans already are running at 100% and I cant see anything but "No Signal" information on my screen, I remember my carte is expressionless
- Sep nineteen, 2022
- 477
- 0
- 1,960
- 91
- #iv
- Apr 19, 2008
- 4,015
- 0
- 23,460
- 223
- #5
- Mar 25, 2022
- 60,090
- 1,011
- 152,790
- 16,739
- #6
- May 22, 2022
- 1,101
- 0
- 2,660
- 198
- #seven
If you said the GPU shutoff without warning at that place's a good take chances a voltage regulator blew. Hopefully this isn't the case.
I would recommend resetting your CMOS (have out motherboard battery and all power connections for 10 minutes), remove one stick of RAM, and clean off the GPU and PCI slot with alcohol or cleaner of your choice.
If you lot can get the GPU to boot, put your other RAM back in and go on with your twenty-four hours. Good luck.
Your motherboard also two PCI-E slots available. It's very possible that a slot can be damaged. Try the other one.
- #8
If you said the GPU shutoff without warning in that location'southward a good take chances a voltage regulator blew. Hopefully this isn't the case.
I would recommend resetting your CMOS (take out motherboard battery and all ability connections for 10 minutes), remove i stick of RAM, and clean off the GPU and PCI slot with alcohol or cleaner of your choice.
If you lot tin can get the GPU to boot, put your other RAM back in and proceed with your day. Good luck.
Your motherboard also two PCI-E slots available. Information technology's very possible that a slot tin can be damaged. Try the other one.
Ok, hither's what i'5 done:
Cleaned PCI slots
Cleaned GPU
Removed CMOS battery like you said
Now it seems like fans are running at normal speed, not at 100% like before, simply there is still "No Signal" data on my screen so I cant exercise annihilation on that card, cant hear any beeps or annihilation like that.
Non sure if that matters but now im using Intel'southward card and everything running fine on it.
Quickedit:
Besides, Im non sure how information technology works but when I connect my monitor to Intel's card with GTX 770 on PCI Slot not connected to any monitors, I deceit see anything on my screen (and without GTX 770 in slot it works normally) so it looks similar PC is detecting GTX 770 but at that place is no betoken (IM Non SURE IF IT WORKS LIKE THAT)
- May 22, 2022
- ane,101
- 0
- 2,660
- 198
- #9
If y'all said the GPU shutoff without warning there's a skillful chance a voltage regulator blew. Hopefully this isn't the example.
I would recommend resetting your CMOS (take out motherboard battery and all power connections for 10 minutes), remove one stick of RAM, and clean off the GPU and PCI slot with alcohol or cleaner of your choice.
If you tin become the GPU to boot, put your other RAM dorsum in and go on with your day. Skilful luck.
Your motherboard likewise 2 PCI-E slots available. It'southward very possible that a slot can be damaged. Try the other i.
Ok, here'due south what i'five washed:
Cleaned PCI slots
Cleaned GPU
Removed CMOS battery similar you said
Now it seems like fans are running at normal speed, not at 100% like before, but there is all the same "No Betoken" information on my screen so I cant do anything on that card, cant hear any beeps or annihilation like that.
Non sure if that matters merely now im using Intel's carte du jour and everything running fine on it.
It seems progress may have been made just we're not there all the same.
Can you go into the BIOS and double check that your Video is set to the PCI-Due east? Do yous have your monitor plugged into the GPU and Not your motherboard (I know it sounds ridiculous and I don't want to belittle you, but it does happen).
If all else fails, please endeavour the bottom PCI-E slot.
- #10
If yous said the GPU shutoff without warning there'due south a good gamble a voltage regulator blew. Hopefully this isn't the case.
I would recommend resetting your CMOS (have out motherboard battery and all ability connections for 10 minutes), remove one stick of RAM, and clean off the GPU and PCI slot with alcohol or cleaner of your choice.
If you can go the GPU to boot, put your other RAM dorsum in and go along with your mean solar day. Expert luck.
Your motherboard also two PCI-E slots available. Information technology'due south very possible that a slot tin can be damaged. Endeavor the other one.
Ok, hither's what i'v washed:
Cleaned PCI slots
Cleaned GPU
Removed CMOS bombardment like you lot said
At present it seems like fans are running at normal speed, not at 100% like before, but there is still "No Signal" information on my screen then I deceit exercise anything on that card, cant hear any beeps or anything like that.
Non sure if that matters but now im using Intel's bill of fare and everything running fine on it.
It seems progress may have been made merely we're not there yet.
Tin yous become into the BIOS and double check that your Video is set to the PCI-Eastward? Do you take your monitor plugged into the GPU and NOT your motherboard (I know information technology sounds ridiculous and I don't want to belittle you, just it does happen).
If all else fails, delight attempt the lesser PCI-Eastward slot.
I changed some options of integrated graphic carte in BIOS and its WORKING! ITS ALIVE ! ! ! !
Weird think is that when all it happened I didnt impact whatsoever options so how can I prevent similar situations in hereafter?
- May 22, 2022
- 1,101
- 0
- two,660
- 198
- #11
If you said the GPU shutoff without warning there's a skillful chance a voltage regulator blew. Hopefully this isn't the instance.
I would recommend resetting your CMOS (accept out motherboard bombardment and all power connections for x minutes), remove one stick of RAM, and clean off the GPU and PCI slot with alcohol or cleaner of your choice.
If you tin get the GPU to kicking, put your other RAM back in and go on with your day. Skilful luck.
Your motherboard also ii PCI-Eastward slots available. It'south very possible that a slot tin can be damaged. Endeavor the other one.
Ok, here's what i'5 washed:
Cleaned PCI slots
Cleaned GPU
Removed CMOS battery like yous said
Now it seems like fans are running at normal speed, not at 100% like before, but there is still "No Signal" data on my screen and so I cant practise anything on that card, deceit hear whatever beeps or anything like that.
Not sure if that matters but now im using Intel'south card and everything running fine on it.
Information technology seems progress may take been fabricated but we're not there yet.
Tin you go into the BIOS and double check that your Video is set to the PCI-Eastward? Exercise you have your monitor plugged into the GPU and Non your motherboard (I know it sounds ridiculous and I don't want to belittle you, but it does happen).
If all else fails, please try the bottom PCI-E slot.
I changed some options of integrated graphic card in BIOS and its WORKING! ITS ALIVE ! ! ! !
Weird think is that when all it happened I didnt bear upon any options so how tin can I forestall like situations in future?
It's hard to say at this point but I think the solution was resetting the CMOS completely to refresh the systems BIOS, then switching over to your GPU to seal the deal.
My guess is a ability surge, oestrus, or a G daze triggered your system to go unstable and corrupt your CMOS. Watch temps closely for the adjacent while. Plug your computer directly into the wall (No power-bar)
Adept luck and good to hear it's working.
- #12
If you said the GPU shutoff without alert at that place's a good risk a voltage regulator blew. Hopefully this isn't the example.
I would recommend resetting your CMOS (take out motherboard battery and all power connections for x minutes), remove i stick of RAM, and clean off the GPU and PCI slot with booze or cleaner of your pick.
If yous can get the GPU to boot, put your other RAM dorsum in and go on with your day. Good luck.
Your motherboard also two PCI-E slots available. It's very possible that a slot tin be damaged. Try the other one.
Ok, here's what i'5 washed:
Cleaned PCI slots
Cleaned GPU
Removed CMOS bombardment like you said
Now information technology seems like fans are running at normal speed, not at 100% like earlier, but there is still "No Signal" information on my screen and then I deceit exercise annihilation on that card, cant hear whatsoever beeps or anything like that.
Not certain if that matters just now im using Intel's card and everything running fine on it.
It seems progress may have been fabricated only we're not in that location all the same.
Tin can yous go into the BIOS and double check that your Video is gear up to the PCI-East? Do y'all have your monitor plugged into the GPU and Non your motherboard (I know information technology sounds ridiculous and I don't desire to belittle y'all, but information technology does happen).
If all else fails, please try the bottom PCI-E slot.
I changed some options of integrated graphic card in BIOS and its WORKING! ITS ALIVE ! ! ! !
Weird think is that when all information technology happened I didnt touch whatsoever options so how can I prevent similar situations in future?
It'south hard to say at this point merely I think the solution was resetting the CMOS completely to refresh the systems BIOS, then switching over to your GPU to seal the bargain.
My gauge is a power surge, heat, or a 1000 shock triggered your organisation to become unstable and corrupt your CMOS. Spotter temps closely for the side by side while. Plug your computer directly into the wall (No power-bar)
Good luck and good to hear it's working.
Ok, for at present im simply gonna scout temps because im so scared to bear on annihilation haha! Thanks for help capeesh it!
| Thread starter | Like threads | Forum | Replies | Date |
|---|---|---|---|---|
 | Question RTX 3070 Utilization low in multiple games | Graphics Cards | 25 | |
 | [SOLVED] Should I buy Geforce RTX 3050 or RTX 2060 nowadays? | Graphics Cards | eight | |
| I | Question GeForce RTX 2060 Crashing? | Graphics Cards | three | |
| J | Question Geforce quadro k4200 | Graphics Cards | 3 | |
 | Question What are your opinions of the EVGA GeForce GT 1030 SC GPU for conducting and editing video interviews? | Graphics Cards | 4 | |
| D | Question EVGA GeForce RTX3060 Ninety Gaming LHR 12 GB - gpu fan buzzing when starting upwardly | Graphics Cards | 2 | |
 | Question GTX 3060 TI has no display when installed on Intel PCs simply works fine on AMDs ? | Graphics Cards | thirteen | |
 | Question NVIDIA GeForce GT 1030 DisplayPort not working ? | Graphics Cards | 0 | |
 | Question Newly released Asus Geforce Nvidia RTX 3050 8GB GPU install leaves me with PCI error. Please help! | Graphics Cards | 1 | |
 | Question Is Nvidia Geforce Game Prepare Commuter that important for light gaming (can't get it to download from site.) | Graphics Cards | 1 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
Source: https://forums.tomshardware.com/threads/geforce-gtx770-fans-spinning-at-full-speed-no-signal.2848768/
Posted by: myerslizeatied.blogspot.com
0 Response to "Can I Remove The Fans From My Gigabyte 770 To Clean Them"
Post a Comment